How to update your Nexus 5 and Nexus 2013 to Android 5.0 Developer Preview (Video)

How to update your Nexus 5 and Nexus 2013 to Android 5.0 Developer Preview (Video)

If you want to conduct an experiment and install on your Nexus 5 or Nexus 2013 Android 5.0 the latest version? This article will describe in detail how to install the firmware on your Nexus device.

Since Google released the official final images for NEXUS, it makes no sense to download preview versions – download and install the Android 5.0 Lolipop on the Nexus

The content of the article:

  1. Prerequisites and Features
  2. Instructions on firmware Nexus
  3. Video instructions for firmware Nexus
  4. Possible problems in piercing

 

What is necessary for the firmware?

1. Desktop or notebook computer (for Windows)

2. The original, undamaged cable MicroUSB

3. Charge your Nexus device by at least 30%

4. Download official preview version of Android L for your Nexus devices

How to update your Nexus 5 and Nexus 2013 to Android 5.0 Developer Preview (Video)

5. Download driver for Nexus and after set them (If installed)

6. Turn USB debugging on Android

7. Download the Firmware site GuiderootADB RUN and set

8. If you do not set more than one archive on your computer, 7-zip

Instructions on how to flash the official firmware

Nexus devices

 

Translate Nexus in Bootloader mode

Option 1

a) Turn off the device

b) nip buttons simultaneously Volume Down and PFeeding

How to update your Nexus 5 and Nexus 2013 to Android 5.0 Developer Preview (Video)

option 2

a) Run the program Adb RUN (Works only when the «USB debugging«If not already done so previously)

b) Connect the Nexus to your computer via USB

c) Select to ADB RUN menu Reboot -gt; Reboot Bootloader

How to update your Nexus 5 and Nexus 2013 to Android 5.0 Developer Preview (Video)

Preparing firmware

2. Unzip the downloaded firmware (firmware is in two archives)

How to update your Nexus 5 and Nexus 2013 to Android 5.0 Developer Preview (Video)

Firmware Nexus 5 and Nexus 2013 to Android L

3. The program ADB RUN go to Run SCRIPT

4. In the Open box, move the conductor firmware file and close the window

5. Press the Enter button and then the firmware will start (in the During the firmware does not pull out the USB cable)

Possible problems in piercing

waiting for device error

If you have a long burn time of inscription in the command window waiting for device – Means:

  • Not installed or incorrectly installed driver – Install or reinstall
  • Your Android device is not in Bootloader mode – convert to the appropriate mode
  • Incorrect connection to the USB port – use the rear USB 2.0 ports the computer, do not use a USB hub
  • Try the firmware on another computer
[Collapse]
Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *