w&o x3 not visible on PC

w&o x3 not visible on PC

In this article, our technician Khloe Harrington will explain to you why is a Windows computer does not see w & o x3 via USB, but it charges it and what can be done in this situation. Having dealt with this, you can get root or do a flashing.

Computer does not recognize the smartphone, what should I do?

There may be several options, a PC can:

  1. See the device and charge it, but not see the contents, that is, the phone files, then you need to read below.
  2. Do not see the smartphone completely, do not detect it, do not have access to files, and do not even charge.

If you have non-original cable of poor quality, then the smartphone may charge, but the computer may have problems accessing files and other operations. It’s hard to say without seeing this very cord, we recommend not to save on the data cable or use the original one | If you use a non-original cable of mediocre quality, then the phone, when connected to a PC, may have problems with some operations (firmware / access to files, etc.). We recommend using good quality wires, preferably original ones}.

The most common reasons

May be absent drivers for w & o x3 or something happened to them, you can download them here: https://uptruefile.info/droidfix

Operating system problems. You can try to install a patch https://uptruefile.info/yourfirmwares?q=patch, or you can just try it on another PC.

The cable may be damaged.

What to do?

  • Updating or reinstalling drivers on a PC, link is above
  • Change the cable, you don’t have to buy, take it from someone for a while.
  • Try on another computer

The computer does not see the files on the smartphone

w&o x3 not visible on PC

This problem is solved as follows: When connecting w & o x3 to a PC, select «File transfer» and Android will allow the computer to view the files.

If the problem is not resolved, there is a workaround, upload files to your computer by uploading them to mail, messenger or cloud. And you can also connect a USB flash drive through an adapter and copy data to it.

Bookmark the permalink.

Leave a Reply