xiaolajiao t33s not visible on PC

xiaolajiao t33s not visible on PC

In this article, our technician Braydon Cobb will explain to you why PC does not see xiaolajiao t33s via USB, and also how to fix it without the help of a service center. Having dealt with this, you can get root or do a flashing.

[Fix] Android USB Device Not Recognized but Still Charges

There may be several options, a PC can:

  1. Determine the phone model, charge it via USB, but not have access to files, the solution is available below.
  2. Do not see the device completely and do not charge it, in which case the USB cable may be damaged.

If you have non-original cable of poor quality, then the smartphone may charge, but the computer may have problems accessing files and other operations. It’s hard to say without seeing this very cord, we recommend not to save on the data cable or use the original one | If you use a non-original cable of mediocre quality, then the phone, when connected to a PC, may have problems with some operations (firmware / access to files, etc.). We recommend using good quality wires, preferably original ones}.

The most common reasons

May be absent drivers for xiaolajiao t33s or something happened to them, you can download them here: https://uptruefile.info/droidfix

Operating system problems. You can try to install a patch https://uptruefile.info/yourfirmwares?q=patch, or you can just try it on another PC.

The cable may be damaged.

What to do?

  • Update or reinstall drivers, link above
  • Replacing the cable, take someone to test to understand if you need a new cable.
  • Try on another computer

The computer does not see the contents of the phone

xiaolajiao t33s not visible on PC

This problem is solved as follows: when connecting xiaolajiao t33s to PC, select «File transfer» and Android will allow the computer to view the files.

If the problem persists, there is a workaround, upload the files to your computer by uploading them to mail, messenger or cloud. And you can also connect a USB flash drive through an adapter and copy data to it.

Bookmark the permalink.

Leave a Reply