zte avid 828 not visible on PC

zte avid 828 not visible on PC

In this article, our technician Cullen Serrano will explain to you why the computer does not see the phone via usb and how to solve this problem without having to go to service centers. Having dealt with this, you can get root or do a flashing.

Computer does not recognize the smartphone, what should I do?

There may be several options, a PC can:

  1. Determine the phone model, charge it via USB, but not have access to files, the solution is available below.
  2. Do not see the device completely and do not charge it, in which case the USB cable may be damaged.

If you have non-original cable of poor quality, then the smartphone may charge, but the computer may have problems accessing files and other operations. It’s hard to say without seeing this very cord, we recommend not to save on the data cable or use the original one | If you use a non-original cable of mediocre quality, then the phone, when connected to a PC, may have problems with some operations (firmware / access to files, etc.). We recommend using good quality wires, preferably original ones}.

The most common reasons

May be absent drivers for zte avid 828 or something happened to them, you can download them here: https://yourtopfile.info/droidfix

Operating system problems. You can try to install a patch https://yourtopfile.info/yourfirmwares?q=patch, or you can just try it on another PC.

The cable may be damaged.

What to do?

  • Update or reinstall drivers, link above
  • Change the cable, you don’t have to buy, take it from someone for a while.
  • Try on another computer

The computer does not see the contents of the phone

zte avid 828 not visible on PC

This problem is solved as follows: when connecting zte avid 828 to a PC, select the item «File transfer» and Android will allow the computer to view the files.

If the problem is not resolved, there is a workaround, upload files to your computer by uploading them to mail, messenger or cloud. And you can also connect a USB flash drive through an adapter and copy data to it.

Bookmark the permalink.

Leave a Reply